|
Sessions 1-18
The papers are downloadable by session only. If you have a single paper you would like, please contact Lauren McCaughey.
Session #1:
No Formal Papers Submitted
Session #2:
Pultrusion I
- Determination of Shear Properties for RP Pultruded Composites
- S. S. Sonti, E. J. Barbero, T. Winegardner
- Durability of Conrete Reinforced with Pultruded Fiber Reinforced Plastic Grating
- Gary R. Anderson, Eric Munley, Lawrence C. Bank
- Experimental Behavior of Concrete Bridge Decks Reinforced with Reinforced Plastic (RP) Rebars
- Salem S. Faza, Hota V. S. GangaRao, Sanjeev V. Kumar, Ronald W. Allison
- Deisgn Optimization of FRP Universal Connectors
- Ayman S. Mosallam, Nabih E. Bedewi, Evan Goldstein
Session #3:
Fillers and Additives
- Comparison of Mineral-Based Low Profile Additives (MLPS's) with Conventional Shrink Control and Low Profile Additives
- David A. Skelhorn, Robert A Baker
- The Influence of Thermoplastic Additives on the Performance of Organic Peroxides in Up-Molding Compounds
- Bryce A. Milleville, Nol Groenendaal, Wim Bladergroen, Andre' van Swieten
- A New Wetting Additive for Improved Processing and Performance in Body Putty
- E. L. Dolson, Donald E. Cope, Holger Heilmann
- Alumina Trihydrate in Polyester Resin-Improving Fire Retardant Properties by Particle Packing and Surface Moditfication
- Fracture Toughness of Low Profile Additive Modified Unsaturated Polyester and Vinyl Ester Resins
- Jill S. Ullett, Richard P. Chartoff
- The Dimensions of Interfacial Separation by Organosilanes in Composites
Session #4:
Resin Transfer Molding I
- Phenolic RTM - A Boon to Mass Transit
- The Design and Control of Resin Transfer Molding Equipment
- Resin Transfer Molding for High Fiber/Low Void Content
- Gray Fowler, Steve Phifer
- Development of Polyurethane RTM Systems for High-Performance Applications
- Neil H. Nodelman, David D. Steppan, John H. Perry, Sanjeev Madan
- Optimization of Filler Particle Size for Resin Transfer Molding
- Effects of Processing Conditions on the Formation of Voids During Advanced RTM Processes
- Heon Ki Hwang, Young Roak Kim, Jae Won Lee, Mun Jo Jung, Yohan Rew
Session #5:
SMC/BMC I
- Design and Molding of Large Vessels for On-Site Sewage Treatment Facilities with Thick Molding Compound (TMC)
- Eiichi Soma, Masataka Takasugi, Yuuzou Hayakawa, Nobuyuki Nakagawa
- Experimental Verification on Simulating Shrinkage and Warpage of Thin Compression Molded SMC Parts
- Tim A. Osswald, Esther M. Sun, Shi-Chang Tseng
- Analysis of LPA Mechanism by Dilatometry Study
- Mark Kinkelaar, Shailesh Muzumdar, L. James Lee
- Effect of Adding Particle and Fiber Recyclate to SMC on Mechanical Properties and Structure
- J. Schiebisch, G. W. Ehrenstein
- Application of Finite Element Structural Analysis to Evaluate the Rigidity of A Sewing Machine Frame Injection-Molded from Bulk Molding Compound
- Makoto Saito, Osamu Otani, Tomokazu Nakagawa, Peter Bucco, B. Sedlatschek, Bow San Lin
- High-Pressure/High-Temperature Dilatometry
- Hamid G. Kia, Paul V. Viscomi
Session #6:
Corrosion
- Factors Affecting the Fabrication of Corrosion Barriers for RP Equipment in Bleaching Environments
- Lisa M. Adkins, Don W. Daniel, Dwight A. Rust
- A Newly Developed Low Odor Resin for Flooring
- Kazuyuki Tanaka, Koiji Arakawa, Etsuji Iwami, Kanemasa Nomaguchi
- Proper Cure of Vinyl Ester Resins
- David J. Herzog, Todd B. Brown
- Behavior of Glass-Fiber Composite Pipes Under Internal Pressure as a Function of Composite Cohesion Parameters
- J. Pabiot, P. Krawczak, C. Monnier
- Acoustic Emission Characteristics of GFRP Laminates Under Corrosive Environments
- Y. Fujii, H. Hamada, S. Ramakrishna, Z. Maekawa, A. Murakami, T. Yoshiki
Session #7:
No Formal Papers Submitted
Session #8:
Construction I
- Structural Efficiency of Pultruded FRP Bolted and Adhesive Connections
- Sotiris N. Sotiropoulos, Hota V. S. GangaRao, Ronald W. Allison
- Fatigue Characterization of Pultruded Box and Wide Flange Sections with Lap Joint
- Hota V. S. GangaRao, V. Nagaraj, Rodney A. Ritchey
- Tests on Deep I-Shape Pultruded Beams
- A. Zureick, L. F. Kahn, B. J. Bandy
- Local Buckling of Pultruded FRP Beams - Analysis and Design
- Lawrence C. Bank, T. Russell Gentry, Murali Nadipelli
- Connection and Reinforcement Design Details for Pultruded Fiber Reinforced Plastic (PFRP) Composite Structures
Session #9:
Pultrusion II
- A Process Model to Describe Matrix Flow and Heat Transfer in Thermoplastic Pultrusion
- Petri J. Hepola, Suresh G. Advani, R. Byron Pipes
- Cure System Design for Highly Filled Pultrusions
- Nelson H. Douglass, Sean P. Walsh
- Pultrusion Die Design Optimization Opportunities Using Thermal Finite Element Analysis Techniques
- Phenolic Pultrusion: Innovations for an Emerging Technology
- T. H. Dailey, Jr., Michael W. Klett
- Improved Pigmentable Low-Profile Pultrusion System
- Mitsunori Ikezoe, Nelson H. Douglass
- A Comparison of Properties and Processing of Epoxy Resins Used in Pultrusion
- Ellen Lackey, Denise Theobald, James G. Vaughan
Session #10:
Resin Transfer Molding II
- Structural Resin Transfer Molding with Twin Injection System
- Hiroyuki Hamada, Naoto Ikegawa, Zenichiro Maekawa
- Laminate Temperature Distributions During Non-Isothermal Impregnation of Fiber Preforms
- G. Lebrun, R. Gauvin, C. D. Rudd
- Flow Properties of Resin in a Vacuum Assisted Resin Transfer Molding Process
- Kazunori Watahiki, Munehiro Ichimura, Hidekatsu Goto, Yoshitaka Abe
- Void Formation and Removal in Liquid Composite Molding
- N. Patel, V. Rohatgi, L. J. Lee
Session #11:
Regulatory
- Update on Air Regulations
- Solid Waste Regulations of Concern to the Composites Industry
- Update on Ergonomics and Worker Safety Standard
- OSHA-Reform', Styrene Classification and PEL Update
- Case Study: Complying with Title V Permitting Requirements
- Update on Study of Emissions from Open Molding Processes
Session #12:
Marine
- Sandwich Core Creep at Three Temperatures and Fatigue Properties of End-Grain Balsa and PVC Foams
- Continuing Study of Polyester Marine Coatings
- Jeffrey L. Wilcoxson, Walter H. Brueggemann, Lope C. Estonina, James T. Kempthorn, Alexander D. McMaster
- A Case Study of Structural Core Application in Marine Vessels
- Development of Composite Construction in Passenger Craft
- The Application of Hybrid Resins as a Barrier Coat in Unsaturated Polyester Lamination
- Chih-Pin Hsu, Gary E. Wilde, Mike D. Marquez, Steven L. Voeks
- Shared Risk/Shared Manufacturing - Partnerships Between Government and Industry
Session #13:
SMC/BMC II
- Materials Advances for Under-the-Hood Applications
- Low Cost Molding with Low Pressure Molding Compound (LPMC)
- John A. Neate, Warren Robins, Steven P. Hardebeck, John J. Young
- Compression Molded Sheet Molding Compound in a Clinical/Hospital laboratory Environment
- Timothy D. Simko, Ronald C. Mathia
- Internal Pigmentation of Low Profile Composites, Part III
- Product Development Team Innovation in Design and Process Engineering for the New 'GENESIS-70 Series' Ford New Holland Tractor Body Panels
- R. D. Kurtz, D. B. Stauffer, L. Pitt, P. Emrich
Session #14:
Construction II
- Design and Construction of Fiberglass Truss for a Long-Span Fiberglass Building
- Ed (Ahmed) Morsi, J. Larralde
- Tension Rod End Attachments Formed via Reforming Pultruded Thermoplastic Composite Rods
- Scott R. Taylor, Ever J. Barbero
- Compression-Molded Cultured Onyx Using a Newly Developed Low-Profile Agent
- Yukiko Fujita, Tetsuya Harada, Tomomasa Mitani, Hirokazu Yamada, Gwilym Owen
- Crack Resistance of GFRP Waterproofing Structures
- Charles R. McClaskey, Syuya Tsuji, Akio Sagawa
Session #15:
Recycling
- Recycling Post-Consumer Glass Reinforced Composites - The Role of Glass Fibers
- W. D. Graham, R. B. Jutte, D. L. Shipp
- Recyclability of Long Glass Mat Reinforced Thermoplastic Composite
- Hiroyuki Hamada, Susumu Yamaguchi, Gabirel O. Shonaike, Zenichiro Maekawa, Teruo Kimura
- Solvent Separation: A Method for Recycling Uncured SMC
- J. C. Bradley, W. D. Graham, R. Forster
- SMC Recycling: An Update - ERCOM's Experience in Production and Application
- Peter Schaefer, Alan G. Plowgian
- Recycling Composites in Canada: An Update
- Market Development for Recycling Thermoset in Japan
Session #16:
Resins
- The Role of Interactions at Interfaces of Glass-Fiber Reinforced Composites
- I. Ulkem, H. P. Schreiber
- Effect of Styrene Emission-Inhibiting Additives on the Interfacial Fracture Toughness of a Laminated Glass Fiber Reinforced Polyester Matrix Composite
- Thomas J. Mackin, Mikael O. V. Skrifvars
- Toughened Polyester: A Novel System
- R. Subramaniam, F. J. McGarry
- Strategic Price Indifference Analysis of Major UPR Raw Materials Marine UPR, A Case in Point
- Dr. Balaji B. Singh, Mihir I. Patel
- Analysis and Applications of Urethane-Unsaturated Polyester IPN
- Y. C. Chou, B. Wang, L. James Lee
- Unique Sprayed Low-Density Coring and Laminating System
- John Raymer, Claire Niland
Session #17:
Reinforcements
- Design of Preforming Process for a Thermoformable Fiber Mat
- Contribution of Interfacial Strength and/or Woven Structure on Composite Mechanics
- Hiroyuki Hamada, Zenichiro Maekawa, Hideki Ichihashi, Nobuo Ikuta
- The Effect of Silane Structure on Glass Fiber Performance in Reinforced Composites
- J. A. Gomez, J. A. Kilgour
- Design of Knitted Fabric Reinforced Composites
- Wei-Lang Wu, Hiroyuki Hamada, Masaya Kotaki, Zenichiro Maekawa
- Natural Fibers Used in Composite Materials
- A. Balestrini, R. Giannetti, F. Magaraggia, H. Wolff
Session #18
SMC/BMC III
- Development of a Modular, Automatic SMC Charge Pattern Cutter
- Recent Advances in Structural Adhesive Technology for Bonding SMC and Other Forms of Reinforced Plastics
- Jeff Housenick, Vince Pascarella
- ZMAP: A System for Measuring Surface Height
- Applications of Dielectric Analysis for Cure Monitoring and Control in the Polyester SMC/BMC Molding Industry
- David D. Shepard, Kelly J. Craven
- LPMC - The Alternative in Composite Molding
|
