|
Sessions 1-24
The papers are downloadable by session only. If you have a single paper you would like, please contact Lauren McCaughey.
Session #1:
No Formal Papers Submitted
Session #2:
New Developments in SMC/BMC Processing
- LPA Performance in Low Temperature BMC/SMC Molding
- Wai-Ming J. Kan, L. James Lee
- Hydraulically-Assisted Compression Molding Material and Process Development
- Jon E. Collister, Kurt I. Butler, James E. Rinz
- A New Continuous Fabrication System for SMC-Roll Forming
- New Developments in Low Pressure SMC
- K. E. Atkins, R. L. Seats, C. G. Reid, G. Behar
- SMC Curing Simulation
- Koichi Akiyama, Hiroyuki Kuroki, Terukazu Matsuda
Session #3:
Concrete Structures:An emerging Market for high-performance FRP Composites
- FRP Grids Reinforce and Corrugated Sheets Roof a Salt Storage Facility
- Charles H. Goodspeed, Derek Cronin, Robert M. Henry, Kevin Thibodeau
- Bond of Fiber Reinforced Plastic (FRP) Rods to Concrete
- Mesfer M. Al-Zahrani, Antonio Nanni, Salah U. Al-Dulaijan, Charles E. Bakis
- Thermoset Polymer Performance under Harsh Environments to Evaluate Glass Composite Rebars for Infrastructure Applications
- S. Derek Altizer, P. V. Vijay, Hota V. S. GangaRao, Nelsson Douglass, Rick Pauer
- A Decision Making Tool for Evaluating Composites in Construction Applications
- Mohamed A. El-Mikawi, Ayman S. Mosallam
- Experimental Behavior of Concrete Beams with Extermally Bonded Carbon Fiber Tow Sheets
- Sara Javed, Sanjeev V. Kumar, Hota V. S. GangaRao
Session #4:
Regulatory Spotlight: Hazardous Waste Handling
- Outlook on Regulation of Solid and Hazardous Waste
- Practices for Handling and Disposal of Polyester Resin Waste
- Practices for Handling and Disposal of Organic Peroxide Waste
- Practices for Handling and Disposal of Acetone Wastes
Session #5:
Regulatory Spotlight: Advancing the industry Program for Managing Occupational Exposure to Styrene
- Regulation of Styrene: Past, Present and Future
- Why 50 ppm?: Science on Health Effects
- Directed Flow Ventiliation Design
- Close Capture Ventilation Design
- OSHA's New Respirator Program
Session #6:
Emerging Application for Composites in Mass Transit: What' on the Horizon?
- The Evolution of Composites in the Transit Industry
- Phenolic Composites in the Aircraft Industry and the Necessary Transition to the Mass Transit Rail Industry
- Joseph R. Zingaro, Caryn E. King
- Transit Industry, Trends in Composite Product Requirements (as Seen from the Perspective of a Project manager)
- The Road to Commercial and Technical Success in the Passenger Rail Industry
- Design of Composite Hollow-Core Panels
- Marie-Helene Philippe, Taieb Naciri, Alain Ehrlacher
- An Innovative Fully Automated RTM Plant for Class 'A' Mass Transit Applications
- Peter W. Vaccarella, Giorgio Barbieri, Massimo Mazzola, Mario Russo
Session #7:
Creativity and Innovation with Composites for Infrastructure
- Bidding Composites to the General Contractor: One Lost Opportunity for Composites on a Civil Engineer's Project
- William Kreysler, Richard Mogel
- Design of an Advanced Composite Material Space Frame System
- G. Eric Johansen, Roy W. Wilson, Frederic Roll, Noah Olson, Chris Morrison, Robert D. Sweet, Jr.
- Application and Performance of Sandwich Panel Composites for Transportation Facilities
- Advanced Composite Material Support Frames: An Evaluation of the Bow Meadow Bridge at Lake Crescent, WA
- G. Eric Johansen, Roy W. Wilson, Frederic Roll, Noah Olson, Martin H. Millman, Michael Silvey
- Stiffening of Steel Stringer Bridges with Carbon Fiber Reinforced Plastics for Improved Bridge Rating
- Ever J. Barbero, Scott Messick, Mohammed Al-Megdad
Session #8:
Designing with Composites for Product Improvement
- Discussion on FRP Design Properties Based on Flexural Tests (ASTM D-790) and Tensile Tests (ASTM D-638)
- Optimal Design of Stiffened Composite Laminates in Compression
- Issam E. Harik, Mei-Wen Guo
- Conception, Design and Fabrication of an All Composite Snowplough for Highways
- Designing Structural Sandwich Composites
- Eurocrete - Solving the Construction Industry's Durability Problem Using Composite Materials
Session #9:
No Formal Papers Submitted
Session #10:
Regulatory Spotlight:Title V Permits- Update and Implementation
- What is a Title V Permit?
- How to Avoid Title V
- 112 (F-G-J-K): Implications of Case-by-Case MACT, Residual Risk and Area Source Programs to Your Title V Permit
- Recent EPA Action of Title V: Increased Flexibility, Decreased Burdens
Session #11:
Regulatory Spotlight: Development of MACT for Composites Manufacturing
- The Flavors of MACT
- Environmental Protection Agency Perspective on Comosites MACT Development
- Pultrusion Industry Council MACT Program
- SMC Environmental Subcommittee MACT Program
- Composites Fabricators Association MACT Program
- National Marine Manufacturers Association MACT Program
Session #12:
Designing with Composites for Interior and Exterior Marine Applications
- Application of Advanced Composites Processes to Yacht Mast Manufacturing
- Structural Design of High Performance Carbon Fiber Sailing Yachts
- The Only Limitation Is Your Imagination
- Cost Effective SCRIMP Applications in the Marine Market
- A Method for Producing Large, Accurate, Economical Female Molds
- Allan Guenter, Brenda Guenter
- The Cost/Performance Advantages of Isophthalic Acid Based Unsaturated Polyesters in Gel Coated Laminates
- Ben R. Bogner, H. R. (Dan) Edwards
Session #13:
Product Improvements and Manufacturing efficiencies in SMC/ BMC
- Alpha-A One Piece Integrated Injection Molded Sewing Machine Housing: 'The Globally Developed Program'
- Makoto Saito, Stefan Kukula, Yasuto Kataoko, Todd Waddle, Don Chung
- Thermal Shock Resistance of BMC Cultured Marble and Onyx Sinks
- Shuji Tonogai, Hideki Shione, Tetsuya Harada, Gwilym E. Owen, Jr.
- Structural Design of Composite Sealing Systems for Automotive Applications
- Advances in Pigmentation of Low Profile Composites, Part IV
- K. E. Atkins, G. C. Rex, R. L. Seats
- SMC Lite - An Innovative New Low Pressure, Low Density SMC
Session #14:
Fighting Corrosion: Performance and Economic advantages of Composites for small and Large Diameter pipe Applications
- Fiberglass Pipe Calculations Made Easy
- Sea Water Corrosion Resistance of Composite Pipe Systems in the Marine Industry
- Richard H. Lea, P. Dennis Conroy
- Fiber Reinforced Plastics (FRP): The Material of Choice for Seawater Intake Systems
- Development of Fire Resistant Fiberglass Pipe
- Capabilities of Large Diameter FRP Pipe for Power and Industry Applications
Session #15:
No Formal Papers Submitted
Session #16:
Regulatory Spotlight: Controls and Pollution Prevention for Styrene Emissions
- Tier II Analysis of Control Technologies
- Opportunities for Styrene Emission Control through Resin Chemistry
- PolyAdd Abatement Technology
- Durr Industries Zeolite Concentrator and Thermal Oxidizer
- Innovative New Approach to Capture and Control of Styrene Emissions
Session #17:
No Formal Papers Submitted
Session #18
Market insights to help guide your composites' Marketing game plan: Fighting Corrosion in the Oil/ Gas, Chemical Processing and Pulp/ Paper Industries
- Positioning Yourself in the Worldscale Oil and Gas Composites Marketplace - Exploration/Capital Investments
- Exploiting Trends in the Use of Composites for Underground Storage Tanks, Panel Liner Boards and Wall Panels
- Productive Partnerships - How Environmental Regulations Will Continue to Drive Composites' Penetration of Industrial Markets
- Global Trends Affecting Expanded Use of Composites in Petrochemical Production
- Long Range Planning: How Trends in Gas Production Will Affect Capital Expenditures for Composites Products
Session #19:
Materials: the Non-Resin side of Composites
- Aluminum Trihydroxide (ATH) as a Filler for Polymer Composites: Comparative Evaluation of Precipitation and Grinding on Thermal Stability and Dehydration Kinetics
- Neal R. Dando, Paula L. Kolek, Alan Pearson, Edward S. Martin, Terry R. Clever
- Synergisms of Colorant and Stabilizer Packages in Prolonging Lifespans of Exterior Composites
- Synergisms of Colorant and Stabilizer Packages in Prolonging Lifespans of Exterior Composites Paul A. Rettinger, Selby M. Brannon
- Recycled Reinforced Plastics as Replacement for Coremat and Plywood Cores in Sandwich Laminates: A Comparison of Mechanical Properties
- Joakim Pettersson, Peter Nilsson
- Potential Use of Reclaimed Propylene Glycol in Manufacturing Unsaturated Polyester Resins
Session #20:
Design and Development trends to improve Pultruded Products
- Designing of Mechanically Fastened Joints in Composite Structures
- Kazushi Haruna, Hiroyuki Hamada
- Product Design and Material Optimization Make Large Pultrusions Perform for Stoughton Composites
- Jeff Martin, Rob Sjostedt
- The Effect of Fiber Orientation Angle on the Unnotched, Open Hole, and Pin-Loaded Strength of a Pultruded Composite
- R. Prabhakaran, S. Devara, Z. Razzaq
- Optimized Design of Fiber Architecture for Pultruded
- Roberto Lopez-Anido, Hota V. S. GangaRao, Rachid Bendidi, Mohammed Al-Megdad
- Construction of a Multi-Cellular Fiber Reinforced Plastic Building
- Hota V. S. GangaRao, Roberto Lopez-Anido, Donald L. Williams, Tim Winegardner
- Development of a New Type of GRP Pole Guard
- Michinari Kanemoto, Fumiyoshi Yamada, Yoshio Ikeda, Katsumi Yamamoto
Session #21:
Innovative Processing technologies for advancing composites manufacturing
- Net Shape Complex Preforms for High Volume Applications
- The Statistically Modified Laminate Model for Fiber Reinforced Injection Moldings - A Practical Way to Get Flow and Structural Analysis Packages on Friendly Terms
- Setfan Kukula, Makoto Saito, Yasuto Kataoka, Tomokazu Nakagawa
- Reliability of Thermomechanical Fatigue in Polymer Matrix Composites
- Processing Instrument Technology: Process Definition with a Cognitive Computer
- Parametric Design Optimization of the Steady-State Thermal Behavior of Aluminum-Particle-Filled Polyester Mass-Cast Composite Tooling
- Stephen P. Brooks, Sean P. Walsh
Session #22:
Materials:The resins side of Composites
- Comparison of Fatigue and Static Physical Properties of Plaques Made with Various Resins Constructed Using a Vacuum Infusion Process and Conventional Lay-Up Method
- David J. Herzog, Louis R. Ross, Todd B. Brown, Matthew C. Kastl
- Evaluating the Durability of Gel Coats Using Outdoor and Accelerated Weathering Techniques: A Correlation Study
- New Vinyl Ester Resin for Artificial Marble
- Yutaka Goh, Hirofumi Izumi, Kazuyuki Tanaka, Kanemasa Nomaguchi
- A New, Versatile Class A SMC Resin
- John J. Young, Ron L. Lucas, Clark B. Wade
- Evaluation of Supplier Performance
Session #23:
Advances in Pultrusion Processing Technologies
- Pultrusion Dies - From Massive and Power Hungry to Lean and Smart
- Teck W. Awa, Howard L. Price
- In-Line Powder Coating of Pultrusions
- Advances in Core Filled Pultrusion Using Recycled Materials
- David E. Shaw-Stewart, Barry T. Sturman-Mole
- High Performance Phenolic Pultrusion Resin
- Shahid P. Qureshi, W. Hayes Ingram, Clint Smith
- A Cost-Effective Approach to High-Strength Phenolic Composites for Infrastructure Applications
- Unlock Pultrusion Speed Potential with Thermally Optimized Pultrusion Dies
- Joseph E. Sumerak, Yatin R. Chachad, Jeffrey D. Martin
Session #24:
Testing and Design- Pathway for Expanding Composites Applications in Construction
- Experimental versus Design Correlations in Multi-Cellular Fiber Reinforced Plastic Panels
- Hota V. S. GangaRao, Roberto Lopez-Anido, S. S. Sonti, Sotiris Sotiropoulos, Tim Winegardner
- The Effects of Heat and Moisture on the Mechanical Properties of Pultruded Graphite/Epoxy and Glass Epoxy Composites
- D. Theobald, J. A. McClurg, J. G. Vaughan
- Impact Load Response of Pultruded Fiberglass Grating
- Zia Razzaq, Ram Prabhakaram, Shahid P. Qureshi, Mike M. Sirjani, Michael D. Petty
- A Practical Design and Optimization Method for Structural Composite Beams
- Julio F. Davalos, Pizhong Qiao, Hani A. Salim
- Bond of Smooth and Machined RP Reinforcement to Concrete - Finite Element Analysis
- V. S. Uppuluri, C. E. Bakis, A. Nanni, T. E. Boothby
- Using Phenolics for Wood Composite 'Hybrid' Members
- T. H. Dailey, S. S. Sonti, H. V. S. GangaRao, D. R. Talakanti
|
