|
Sessions 1-25
The papers are downloadable by session only. If you have a single paper you would like, please contact Lauren McCaughey.
Session #1:
Material Advancement for Automotive and Compression Molded Applications
- The Changing Structural Adhesive Definition in the North American Vehicle Transportation Industry for Composite Body Closures, Framing and Specialty Component Assemblies
- Development of New Glass Mat Structural Thermoplastic Composites
- Enamul Haque, Walt Bassett
- A New Low Profile Additive for Pigmentable SMC/BMC Molding
- Analysis of Fiber Wetting in SMC Formation
Session #2:
Advanced Fiber Architecture in Composites: Braiding, Textile and Preform Technology
- Newly Developed Low Pressure SMC Molding System
- Yasuhiro Obata, Hirohumi Izumi, Kouji Arakawa
- Utilization of Weaving Technologies to Make Engineered Textile Preform Structures
- Braided Reinforcements: Predictive Architectures That Allow for Superior Structural Properties
- Performance and Productivity: Designing with Multiaxials
- The Use of Braided Reinforcements in RTM for High Volume, Low Cost Aerospace Parts
- Aircraft Composite Structures: Background, Benefits, and Usage in the New Business Jets from Raytheon Aircraft
- Designing and Building with Non-Crimp Composite Reinforcements
Session #3:
Advancements in Corrosion-resistant Appliations and Materials
- Case History: A High Aspect Ratio FRP Stack Replaces Failed Steel
- Alfred L. Newberry, Roger Beman
- Selecting Intermediate Performance Polyester Resin Systems for Corrosion-Resistant and High-Strength Applications
- Lower USPE Emissions by Vinyl Toluene Modifications
- James Van Fleet, Melvin Duhon
- High Performance Epoxy Vinyl Ester Line Meeting Current and Future Environmental Concerns
Session #4:
Concrete and Masonry repair and upgrade:Composites increase the service life of Structures
- The HITEC Evaluation Program for Composite Column Wrap Systems for Seismic Retrofit
- David Reynaud, Vistasp M. Karbhari, Frieder Seible
- Seismic Testing and Dynamic Analysis of Masonry Bearing and Shear Walls Retrofitted with Overlay Composite
- Ghassan K. Al-Chaar, Husein A. Hasan
- Pile Resotration of the Lake Pontchartrain Causeway Using an All-Polymer Encapsulation (APE) Process
- Experimental Fracture Mechanics for the Bond between Composite Overlays and Concrete Substrate
- Victor Giurgiutiu, Jed Lyons, Michael Petrou, Dorothy Laub
- Seismic Repair and Upgrade of Structural Capacity of Reinforced Concrete Connections: Another Opportunity for Polymer Composites
Session #5:
Components for achieving durability through superior designs
- Tailored Carbon Fiber-Vinyl Ester Interphases
- M. B. Bump, M. A. F. Robertson, K. E. Verghese, J. J. Lesko, J. S. Riffle, T.-H. Yoon
- Titanate and Zirconate Coupling Agent Applications in Thermoset Composites - 1999(I)
- Vacuum-Assisted Resin Transfer Molding of Unsaturated Polyester and Vinyl Ester Resins-SCRIMP
- Using a Collaborative Process to Derive Analysis Methods, Computer Codes and Design Data for Composite Structures
- Ultra-High Pressure Precision Jet Cutting Using Super-Water
- W. Glenn Howells, Vincent L. Imlay, Renato Lambari, Daniel Weber
Session #6:
Thermosetting Composites I: VOC Reduction Technology
- Low Emission Gel Coats
- The Effectivity of Styrene Suppressants
- Edward Dotson, Dan Breidenbach
- Reducing Emissions Using Equipment
- Styrene Emission Control
Session #7:
Advancements in the Structural Design of Plastice Lumber Applications
- The Evolution of Recycled Plastic Lumber into Structural Applications
- Richard W. Renfree, Thomas J. Nosker
- Simplified Design of Recycled Plastic as a Structural Material
- Malcolm G. McLaren, John P. Pensiero
- Mechanical Properties of Recycled Plastic Lumber and Implications in Structural Design
- Vijaya K. A. Gopu, Roger K. Seals
- Safety Issues Involving Plastic Lumber in Structures: Ignitability, Slip Resistance and Electrostatics
- Lateral-Torsional Response of FRP Beams under Three-Point Loading and LRFD Approach
- Mojtaba B. Sirjani, Zia Razzaq, Ram Prabhakaran
- This Las Vegas Project Is Complicated, Innovative, and Invisible. How Do We Do It?
- Dave Dooley, Kevin Shehee
Session #8: No formal papers were submitted
Session #9:
Pultruded Composites for the Infrastucture
- Lateral-Torsional Response of FRP Beams under Three-Point Loading and LRFD Approach
- Mojtaba B. Sirjani, Zia Razzaq, Ram Prabhakaran
- This Las Vegas Project Is Complicated, Innovative, and Invisible. How Do We Do It?
- Dave Dooley, Kevin Shehee
- An Overview-Composite Material Application in the Design of the U.S. Navy Causeway System
- Beam-Column Design Equations for Pultruded Structural Shapes
- Ever Barbero, Dustin Troutman
- Step-by-Step Engineering Design Equations for FRP Structural Beams
- Pizhong Qiao, Julio F. Davalos, Ever J. Barbero, Dustin Troutman
Session #10:
Concrete Reinforcement: AN FRP solution
- Advancements in GFRP Materials Provide Improved Durability for Reinforced Concrete
- Testing, Evaluating GFRP Cables for Prestressing
- Srinivasa L. Iyer, Ramu Mathukari
- FRP Dowel Bars
- Case History: FRP Dowel Bars Stand Test of Time in Ohio Roadways
- Jim McCallion, Mike Guglielmo
Session #11:
Proactive Environmental Strategies
- Meeting Styrene Emission Limits: A Case Study for FRP Fabricators
- Jim Stone, Ajay Gupta, Benny Duvall
- Concentrator System: The Preferred Solution for Dilute VOC or HAP Applications
- An Energy Balance Study of a Newly Developed Recycling System for Waste Plastics
- Kanemasa Nomaguchi, Shinya Hayashi
- FRP Recycling in Japan
Session #12:
Practical Applications of Plastic Lumber
- RPLDB 1.0-Development of an Interactive Recycled Plastic Lumber Database for the Design Engineer
- Prabhat Krishnaswamy, Nu D. Ghadiali
- Demonstration Projects Using Recycled Plastic Lumber: Pedestrian Bridge at Ft. Leonard Wood, MO and Waterfront Boardwalk at Kelley's Island, OH
- Richard G. Lampo, Prabhat Krishnaswamy
- PVC Decking Boards and Docks
Session #13: No formal papers were submitted.
Session #14:
Regulatory News: Learn about the Regulatory Enviornment that affects your Business
- EPA's Implementation of the Clean Air Act Amendments
- Update on EPA's Toxic Release Inventory
- ISO Certification for Processors/Fabricators
- OSHA's Regulation of Workplace Exposure to Styrene
- SPI's Compliance Assistance Program
Session #15:
Thermoplastic Composites: New Innovations
- Development of New Glass Mat Thermoplastic Composites for Interior Applications
- Enamul Haque, Terry Peterson, Walt Bassett
- Innovative Process Technology for the Batched Flow Production of Load Optimized Textile and Long-Fiber Reinforced Thermoplastic Sandwich-Structures
- Frank Henning, Stefan Troster
- Titanate and Zieconate Coupling Agent Applications in Thermoplastic Composites-1999(II)
Session #16: No formal papers were submitted.
Session #17: No formal papers were submitted.
Session #18
Improving the durability of Composites in demanding environments
- Aging Effects in Polymer Composites
- Christos C. Chamis, Hugh L. McManus
- Durability Fatigue Analysis of Adhesively Bonded Structural Joints
- Ken Lambert, Jeff Parker, Nurten Emek, Dan Leeser
- A Study of Hot Water Resistance of Polyester Resins
- Tetsuya Harada, Hirokazu Yamada
- Tough, Void Free, Flame Retardant Phenolic Networks
- Christy Sensenich Tyberg, Kristine Bergeron, M. Sankarapandian, Po-Jen Shih, James McGrath, Judy Riffle
- Phenolic Composites in Japan
- Kanemasa Nomaguchi, Masami Kasai, Ichizo Weda
Session #19: No formal papers were submitted
Session #20:
Thermosetting Composites II: Progress in Curing Technology
- Electron-Beam Curing of Polymeric Composites as an Enabling Technology for Advanced Manufacturing
- Effects of Curing Agents on Kinetic and Rheological Changes of Vinyl Ester Resins at Low Temperatures
- Effect of Secondary Monomer on Shrinkage Control of the Unsaturated Polyester (UP) Resin Cured at Low Temperature
Session #21:
Advancement and Unique Pultrusion Processing Technologies
- Enhancing Pultrusion Throughput for Greater Profit
- Simulation and Experimental Verification of Resin Flow and Cure in the Injection Pultrusion Process
- Zhongman Ding, Shoujie Li, Huan Yang, L. James Lee, Herbert Engelen, P. M. (Mac) Puckett
- Experimental Comparison of Resin Injection Methods for Pultrusion
- Herbert Engelen, Shoujie Li
- Polyurethanes in Pultrusion: Styrene-Free Alternative Systems
- Ravi R. Joshi, Lori L. Varas, Ajay D. Padsalgikar
- Effects of Fillers on Pultrusion Processing and Pultruded Properties
- Ellen Lackey, James G. Vaughan, Frank Washabaugh, Doug Usifer, Paul Ubrich
Session #22:
Overcoming obstacles to using Composites in the Infrastructure
- Materials Design Considerations for the Use of FRP Composites for Renewal of Civil Infrastructure
- FRP Composites for the Twenty-First Century Civil Infrastructure-Concepts for Structures Designed with Composites
- Durability of FRP Reinforcement for Wood
- Beckry Abdel-Magid, Eoin Battles, Habib Dagher, Mohamed Iqbal
- Structural Integrity Monitoring Using Smart Magnetostrictive Composites
- Jonathan Trovillion, Jason Kamphaus, Robert Quattrone, Justin Berman
- Mangetostrictive Tagging of Composites for Health Monitoring
Session #23: No formal papers were submitted
Session #24: No formal papers were submitted
Session #25:
Composite Bridge: A Civil Infrastructure Solution
- A Systematic Design Approach for FRP Bridges
- Julio F. Davalos, Pizhong Qiao
- Review of Field Data on the All-Composite Highway Bridge, TECH 21
- Dan Richards, Greg Solomon, Rob Jack, Doug Thomson, Chris Dumlao
- Design and Construction of FRP Pedestrian Bridges Subjected to Extreme Snow Load Conditions
- G. Eric Johansen, Roy J. Wilson, Gary Jakovich, Scott Wallace, Merv Eriksson, James Guest
- West Seboeis Stream FRP-Glulam Highway Bridge
- Robert F. Lindyberg, Habib J. Dagher
|
